If you have searched FDA’s databases for a competitor’s device, prepared a 510(k), or listed a product with the agency, you have met a three-letter code such as DQA, LWS or QAS. These FDA product codes look administrative, but they determine how a device is classified, which review division evaluates it, which predicates you can use, and how the product is tracked once it is on the market.
Ever wondered what product codes are, how they relate to FDA’s risk-based classification system, how to identify and select the appropriate code, and why an incorrect selection can result in significant delays.
An FDA product code is a three-character identifier that represents a generic category of device in the Product Classification Database maintained by the Center for Devices and Radiological Health (CDRH). FDA states that the name and product code together identify the generic category of a device, and that the code is based on the classification designated under 21 CFR Parts 862–892 (FDA, Product Code Classification Database).
Three points are worth keeping in mind:
The database is extensive and is subject to continual change. FDA updates the downloadable files weekly, and the open FDA dataset is refreshed monthly, with data going back to 1976. Figures for the number of codes cited in publications differ because they were recorded at different times; the live database should therefore be relied upon rather than figures from secondary sources.
Product codes can be properly understood only within the context of FDA’s classification system. The Medical Device Amendments of 1976 amended the Federal Food, Drug, and Cosmetic Act (FD&C Act) and created three regulatory classes, codified in sections 513 to 515 of the Act. Classes reflect risk and the level of regulatory control needed to provide reasonable assurance of safety and effectiveness.
| Class | Risk level | Controls | Typical market pathway |
| Class I | Low | General controls | Most are exempt from premarket notification; registration, listing and good-practice requirements still apply |
| Class II | Moderate | General controls plus special controls | Usually 510(k); some are exempt; De Novo if no predicate exists |
| Class III | High, life-supporting or life-sustaining | General controls plus premarket approval | PMA (or De Novo, where applicable) |
General controls include establishment registration, device listing, labeling requirements, medical device reporting and adherence to the quality system requirements (with some low-risk exemptions).
Special controls are additional measures such as performance standards, specific labeling, postmarket surveillance or particular testing.
Premarket approval (PMA) requires scientific evidence, typically including clinical data, that the device is safe and effective for its intended use.
A single record in the Product Classification Database typically provides the following information:
This is why experienced regulatory professionals regard the product code as the primary reference point for the regulatory profile of a device.
Many codes are three letters that carry no decodable meaning (DQA, LWS). Newer codes, particularly for newer technology areas such as computer-assisted detection software, often begin with the letter Q (for example QAS), but no inference regarding class or risk should be drawn from the letters themselves.
FDA’s 2013 guidance describes how codes are assigned and maintained in practice:
1. Reuse of an existing code is the most common route:
For a 510(k), the applicant and FDA reviewer normally select an existing code that matches the device and its predicate.
2. A new code can be created:
when a device does not fit an existing description. This happens frequently through the De Novo pathway, where FDA grants a request, classifies the device as Class I or II, and creates both a classification regulation and a product code.
3.Codes appear in FDA’s decision documents:
The 510(k) summary lists all classification codes considered relevant, and the clearance letter names one primary product code, with optional subsequent codes for additional features or functions.
4.Not-substantially-equivalent devices are still recorded:
If a device receives an NSE decision, the code describing it is added to the database for future reference.
5. Obsolete codes are corrected:
If FDA later assigns a new code to a device with an old one, it issues a corrected letter to the manufacturer.
The practical implication is that FDA ultimately determines the code, but applicants are expected to propose the appropriate one in the submission.
Step 1: Define the intended use and indications precisely.
Step 2: Search the Product Classification Database.
Step 3: Read the regulation, not just the code title.
Step 4: Identify predicates and compare their codes.
Step 5: Check for multiple relevant codes.
Step 6: Confirm exemptions and eligibility.
Step 7: If no code fits, use a formal FDA channel.
Options include:
A 513(g) response is informational and non-binding, but it is a valuable written record of FDA’s current thinking.
Product codes are the linking framework of FDA’s medical device regulatory system. They tie a generic device type to a classification regulation, a risk class, a review panel, a market pathway, and the postmarket data that follows. Selecting the correct code is not a clerical step; it is a strategic decision that influences predicate selection, the testing plan, timeline and ongoing compliance. Start with a precise intended use, verify everything in the live FDA database and the underlying CFR text, and engage FDA early whenever the answer is not obvious.
FDA Medical Device Classification and Product Codes Guidance
FDA Product Classification Database
FDA Medical Device Classification Process
FDA Medical Device Regulations (21 CFR Parts 800–1299)
21 CFR Part 860: Medical Device Classification Procedures
An FDA product code is a three-letter code used to identify a medical device type based on its characteristics, intended use, and regulatory classification.
You can search the FDA Product Classification Database using the device name, intended use, product description, or relevant classification information.
No. Product codes identify specific device types, while classification determines whether a device falls under Class I, II, or III based on its regulatory risk.
FDA medical devices are classified into Class I (low risk), Class II (moderate risk), and Class III (high risk).
It helps determine applicable regulatory requirements, identify relevant FDA regulations, and support appropriate submission planning.
Are You Looking For Medical Devices Certifications?
Contact UsHave questions? We're here to help.
We'll respond shortly